Hyundai HYMIG200 – 200Amp MIG/MMA(ARC) Inverter Welder | 230V, Single Phase

Hyundai HYMIG-200 MIG / MMA ARC Inverter DC Output Welder Hyundai

Hyundai’s HYMIG-200 is a single phase MMA MIG welder that is both lightweight and very adaptable. The HYMIG-200 can weld mild steel up to 6mm thick.

It is simple to transport

Thanks to its flexible harness and lightweight pressed steel box with powder coated finish for increased corrosion protection, this 200 amp MIG welder weighs only 20kg and is easy to transport. The HYMIG-200 is particularly cost efficient because it comes with electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer, and a wire brush.

Stepless Regulator

The HYMIG-200 MIG welder has a stepless regulator for infinite variable welding current control, as well as a low current facility for welding thinner materials effectively. The HYMIG-200’s welding (output) current may be adjusted between 50 and 190 Ampere, allowing it to be used with a variety of materials and steel thicknesses.

Always check the ‘Duty Cycle’ on your MIG Welder.

Welders that are less expensive and of inferior quality claim to have a specific amperage output, but have a very low duty cycle on that output. The duty cycle of a welder is the length of time it may be employed on a certain output within a 10-minute period. For example, when used on 200A output (MIG), our 200A welder has a duty cycle of 35%, and when used on 140A output (MMA/ARC), it has a duty cycle of 35%. This implies it may be used continuously for three and a half minutes before being rested for the remaining six and a half minutes.

MIG MMA Welder With Inverter – Lighter And More Efficient

When compared to more typical transformer welders, the Hyundai welders’ inverter technology offers a few benefits. Inverter welders are often lighter, less expensive, and use less input power to provide a comparable output. This lowers the cost of ownership as well as the cost of operation.

Protection Against Thermal Overload

Thermal overload protection is included to guarantee optimal endurance. Steel, stainless steel, copper, nickel, titanium, and their alloys are all suitable for welding.

A Welder That Can Weld Various Materials And Applications

The HYMIG-200 is a good all-rounder for welding with an appropriate wire size of 0.8mm Flux or 1.0mm Solid Core, making it ideal for fabricators, farmers, home mechanics, mobile technicians, and DIY enthusiasts. High-frequency beginnings on the HYMIG-200 enable for smooth arc strikes.

Service and maintenance costs are low.

The HYMIG-200 is exceptionally easy to operate and maintain, with minimum service and maintenance requirements and complete Hyundai UK parts support.

In The Box

• MIG torch with 3m cable
• Electrode holder with 2m cable
• Earth clamp with 1.5m cable
• Chipping hammer
• Wire brush

Know your welder:

(MMA) Manual Metal Arc – Manual Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally known as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.

(TIG) Tungsten Inert Gas – Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld.

(MIG) Metal Inert Gas – Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.

Warranty

Covered by Hyundai UK 2 year warranty.