Hyundai HYMMA200P – 200Amp MMA/ARC Inverter Welder | 230V Single Phase

MMA Inverter Welder Is Compact, Portable, And Versatile

Weighing 9.8kg, the HYMMA-200P is simple to take about owing to its adjustable harness and lightweight pressed steel casing with powder coated finish for increased corrosion protection. It’s designed for the semi-professional user and comes with accessories like a chipping hammer and wire brush in addition to electrode holders and earth clamps with 2m and 1.5m cables.

Regulator with No Steps

The HYMMA-200P MMA welder incorporates a stepless regulator for infinite variable control of the welding current with a low current facility for successful welding of thinner materials. Welding materials and steel thickness may be accommodated using the HYMMA-200P’s adjustable welding (output) current range of 10-200 Amperes.

Information On Duty Cycle

Beware of lesser quality devices by regularly checking the ‘Duty Cycle’. The duty cycle of a welder refers to the maximum length of time it may be operated at a certain output within a 10-minute period. Our 200A welder, for example, has a duty cycle of 60% while operating at 200A output. This implies it may be used for three and a half minutes in every 10 minute session.

Below are the duty cycles for the Hyundai welder range:

Model Output Amperage / Duty Cycle / Period of use within 10 minute period
MMA120 70A / 100% / 10minutes 90A / 50% / 6minutes 120A / 35% / 3.5minutes
MMA160 95A / 100% / 10minutes 120A / 50% / 6minutes 160A / 35% / 3.5minutes
MMA200P 155A / 100% / 10minutes 200A / 60% / 6minutes

TIG200 155A / 100% / 10minutes 200A / 60% / 6minutes

Mig180 105A / 100% / 10minutes 140A / 60% / 6minutes 180A / 35% / 3.5minutes

Cheaper, lower-quality welders may claim to have a specific amp output, but may really have a very low duty cycle at that amp output. Always verify the duty cycle to ensure you are receiving the greatest value for your money.

Technology-Based on Inverters

Hyundai welders employ inverter technology, which provides a number of benefits over more typical transformer welders. Inverter welders are often lighter, more affordable, and use less input power to provide a comparable output. This makes them more cost-effective to acquire as well as to operate.

Protection Against Thermal Overload

Thermal overload protection is included to guarantee optimal endurance. Steel, stainless steel, copper, nickel, titanium, and their alloys are all suitable for welding.

Welder With Inverter Versatility

The HYMMA-200P is an excellent all-rounder for welding with rods up to 5mm and is ideal for fabricators, farmers, home mechanics, mobile technicians, and do-it-yourself enthusiasts. The HYMMA-200P has a high frequency start, which results in a smooth arc striking.

Low-Maintenance

The HYMMA-200P is exceptionally easy to operate and maintain, thanks to its low service and maintenance needs, and it comes with complete Hyundai UK parts support.

In The Box

• Electrode holder with 2m cable
• Earth clamp with 1.5m cable
• Chipping hammer
• Wire brush

Know your welder

(MMA) Manual Metal Arc – Manual Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.

(TIG) Tungsten Inert Gas – Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld.

(MIG) Metal Inert Gas – Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.

Warranty

Covered by a Hyundai 3 year platinum warranty.